When it comes to creativity, there are no bounds to it and people can explore a lot of ways to express art and making of jewellery beads. Using Paper Bead Roller is one of the methods used during this practice of doing it yourself or DIY. This is a very eco-friendly and waste management method that limits unwanted waste papers from lending on the environment and are used for good.
This is a craft that does not require one to have a particular book acquired skill but does require mostly a good eye, a creative open mind and raw talent for perfect execution. To venture into this practice one can use an already manufactured bead roller or they can also apply DIY and create their own pill roller into their style of preference.
The first step is very easy but most crucial as it is the deciding phase of the type of jewelry you wish to make and hence it is here you cut and trim the papers into the shape you desire your item to possess. At this very first stage is where you also consider the shape and the pattern your item should have and hence cut all the papers accordingly.
After the papers have all being trimmed then it is now time to start off the rolling process with the bead rollers and the first end to be fixed into the roller is the wider end. At this stage or even during the entire process one should not be in a hurry and should tackle the entire procedure with care and tenderness in order to attain fine products in the end.
When rolling commences have a tight grip on both the paper and the roller and do not loosen it whatsoever up until you are almost at the end. When 2 inches away from the end, then you can loosen and adjust the pellet into the shape you desire while avoiding any folding of the papers and riding off any undone ends.
Having rolled the papers as per your desired shape it then becomes the time to close it and at this stage, glue is applied to hold the paper in place. Ensure that you apply the appropriate amount of glue on your paper and avoid using too much glue for these to avoid creating the mess with your work and too little glue will also not get the work done.
At this stage the work is almost all done as the final stages will mainly involve reaching a fine end product and developing a pleasing and presentable final product. Finishing takes up most of the time as it is here the glue has to be well leveled and all ends should be fine. It is advised to apply a final thin layer on the bead for durability.
When you have done all these and now have your final beads product, style them accordingly and produce the jewels of your desire. You can even colour the beads or leave them at their natural state. It all depends on your preferences.
This is a craft that does not require one to have a particular book acquired skill but does require mostly a good eye, a creative open mind and raw talent for perfect execution. To venture into this practice one can use an already manufactured bead roller or they can also apply DIY and create their own pill roller into their style of preference.
The first step is very easy but most crucial as it is the deciding phase of the type of jewelry you wish to make and hence it is here you cut and trim the papers into the shape you desire your item to possess. At this very first stage is where you also consider the shape and the pattern your item should have and hence cut all the papers accordingly.
After the papers have all being trimmed then it is now time to start off the rolling process with the bead rollers and the first end to be fixed into the roller is the wider end. At this stage or even during the entire process one should not be in a hurry and should tackle the entire procedure with care and tenderness in order to attain fine products in the end.
When rolling commences have a tight grip on both the paper and the roller and do not loosen it whatsoever up until you are almost at the end. When 2 inches away from the end, then you can loosen and adjust the pellet into the shape you desire while avoiding any folding of the papers and riding off any undone ends.
Having rolled the papers as per your desired shape it then becomes the time to close it and at this stage, glue is applied to hold the paper in place. Ensure that you apply the appropriate amount of glue on your paper and avoid using too much glue for these to avoid creating the mess with your work and too little glue will also not get the work done.
At this stage the work is almost all done as the final stages will mainly involve reaching a fine end product and developing a pleasing and presentable final product. Finishing takes up most of the time as it is here the glue has to be well leveled and all ends should be fine. It is advised to apply a final thin layer on the bead for durability.
When you have done all these and now have your final beads product, style them accordingly and produce the jewels of your desire. You can even colour the beads or leave them at their natural state. It all depends on your preferences.
About the Author:
If you'd like to buy a low priced paper bead roller you can search locally or online. We highly recommend this website at http://www.paperbeadgirl.com for all your bead making needs.
No comments:
Post a Comment